AERIAL WORK PLATFORM REPLACEMENT
JLG Aerial Work Platform Actuator Replacement
We supply replacement rotary actuators for JLG aerial work platforms and boom lifts, built on the mid-size helical platform that matches the original mounting and valve configuration. Find your JLG part number in the table below — including legacy GT codes and superseded numbers — then send it with a photo of the data tag for free verification before you order.
14 part references listed · Last reviewed: September 2026
Cross-reference by part number
JLG Part Number Reference
The primary part number is shown first, followed by equivalent legacy (GT) and superseded numbers for the same actuator. Part numbers below are for identification; send yours for engineering confirmation.
| # | Primary part number | Equivalent / superseded numbers |
|---|---|---|
| 1 | 94397GT | — |
| 2 | 226541GT | — |
| 3 | 1001178269 | 1001307714, 0060066 |
| 4 | 1001217780 | — |
| 5 | 1001307717 | 1001181060 (old), 0060061 (old) |
| 6 | 1001181058 | — |
| 7 | 1001307763 (new) | 1001181057, 0060067 |
| 8 | 1001181051 | 1001307715 (new) |
| 9 | 1001307759 | 0060059S (old), 1001181050 (old) |
| 10 | 1001178248 | — |
| 11 | 1001178247 | — |
| 12 | 233715GT | — |
| 13 | 94398GT | — |
| 14 | 88576GT | — |
Built on the L20 helical platform
Matched to the original interface
These actuators use a helical gear mechanism to convert linear piston motion into high-torque output rotation in a compact, sealed housing — the same operating principle as the units fitted to JLG boom lifts. Rated working pressure matches the original 3000 psi class.
Because build configurations vary across revisions, we confirm the mounting face, shaft, rotation angle, and valve arrangement against your tag before confirming an order.
See the L20 series specifications →How verification works
- 1You send the JLG part number and a photo of the data tag.
- 2We add photos of the mounting face, shaft, and ports if available.
- 3Engineering confirms the build and matching replacement.
- 4You receive a confirmed quote with lead time before ordering.
Product photos
Replacement Units
Request verification
Confirm Your JLG Replacement
Enter your JLG part number and platform model and attach tag photos to your email. We confirm the match and lead time at no obligation.
Frequently Asked Questions
Do you supply replacement actuators for JLG aerial work platforms?
Yes. We supply replacement rotary actuators built on the same mid-size helical platform used in JLG aerial work platform and boom lift applications. Send the JLG part number and a photo of the data tag and we confirm the exact match before quoting.
What is the difference between a GT part number and a 10-digit JLG number?
GT suffix numbers are the legacy JLG part numbering; the 10-digit codes are newer JLG numbers for the same component. Many units also carry older superseded numbers. All of the equivalent numbers for each actuator are listed in the table above.
Can you match my actuator from the part number alone?
The part number identifies the build configuration, but we verify the mounting interface and valve arrangement before confirming an order. A clear photo of the tag together with the mounting face and ports prevents mismatches across revisions.
Are these original JLG parts?
They are independently supplied replacement units engineered to match the interface and performance of the original. JLG part numbers are used for identification only. We verify compatibility before you order.
What information should I send for a fast quote?
Send the JLG part number, the aerial work platform or boom lift model, quantity, and photos of the data tag, mounting face, and ports. Use the form on this page or email hm@hmhydraulics.com.
JLG® is a trademark of its respective owner and is used on this page for part identification only. HM Hydraulics is an independent supplier and is not affiliated with or endorsed by JLG. Compatibility is verified before ordering.