HELAC ALTERNATIVE
L10-25-E-RF-360-S1-C-H Rotary Actuator
Alternatives & cross-reference · 360° · 2,825 Nm at 207 bar
Looking for an alternative to the Helac L10-25 rotary actuator? This page covers the 360° rear-flange catalog configuration, with a rated output torque of approximately 2,825 Nm at 207 bar. HM can help review your unit tag, mounting drawings and operating requirements before proposing a suitable solution.
Independently supplied alternative — not an original Helac part. Configuration and fit are confirmed against your unit tag and drawing before ordering.
Cross-reference
Alternatives for Helac L10-25
Compare this unit with other brands at a similar performance level — then send us your tag and mounting drawing and we confirm which option actually fits.
| Brand | Model / series | Key specification |
|---|---|---|
| Helac | L10-25L10-25-E-RF-360-S1-C-H | 2,825 Nm · 360° |
| HKS | M-DA-H 100 | Similar torque class |
Alternative models are compared by published performance specifications. Mounting dimensions and compatibility must be confirmed before ordering.
What HM checks before recommending a fit
Mounting dimensions
Foot / flange pattern, bolt circle and overall envelope.
Shaft interface
Shaft type, spline / key, diameter and flange arrangement (S1/S2).
Rotation & stops
Rotation angle, end stops and cushioning for your mechanism.
Hydraulic connections
Port size/standard (SAE/UNF), position and counterbalance valve.
At a glance
Quick reference
- Catalog configuration
- L10-25-E-RF-360-S1-C-H
- Original brand
- Helac
- Type
- Rotary actuator
- Rotation
- 360°
- Output torque @207 bar
- 2,825 Nm
- Unit weight
- 83 kg
- Mounting styles
- RF rear flange
Catalog engineering data · Helac L10 catalog, p. 8
Technical specifications — L10-25 (2,500 in-lb class), 360° build
Performance figures are taken from the published Helac catalog (Helac L10 catalog, p. 8). The full configuration and compatibility are confirmed against your unit tag and mounting drawings before ordering.
| Product type | Hydraulic helical rotary actuator |
|---|---|
| Series / size | L10 series · L10-25 (2,500 in-lb class) |
| Catalog configuration | L10-25-E-RF-360-S1-C-H |
| Rotation angle | 360° |
| Rated operating pressure | 207 bar |
| Output (drive) torque @ rated pressure | 2,825 Nm |
| Holding torque | 9,379 Nm |
| Moment capacity — cantilever (S1) | 11,300 Nm |
| Axial load capacity | 6,804 kg |
| Radial load capacity | 6,804 kg |
| Displacement per cycle | 1,828.8 cm³ (360°) |
| Unit weight | 83 kg (360°) |
| Available mounting styles | RF rear flange |
| This build | E = English/SAE threads & ports · RF rear flange · 360° rotation · S1 single (cantilever) flange · C counterbalance valve · H standard seals & bearings |
360° vs 180° on the same L10-25 base
| Parameter | 180° build | 360° build (this page) |
|---|---|---|
| Catalog code | L10-25-E-RF-180-S1-C-H | L10-25-E-RF-360-S1-C-H |
| Displacement per cycle | 914.4 cm³ | 1,828.8 cm³ (360°) |
| Unit weight | 56.7 kg | 83 kg (360°) |
Same frame and output torque, different displacement, weight, body length and straddle moment — they match different cycle-time, hydraulic-flow and mounting-geometry requirements. Select by the angle your mechanism needs, not by the model number alone.
Send us your nameplate and mounting drawing. HM reviews the configuration and cross-brand options, confirms the fit, then quotes the matching unit and price.
Questions
Frequently asked questions
What does the L10-25-E-RF-360-S1-C-H replace?+
L10-25-E-RF-360-S1-C-H is a 360° Helac L-series helical rotary actuator configuration derived from the Parker/Helac HY34-1001 ordering key and Helac L10 catalog, p. 8. It is assembled per the catalog ordering rules rather than read from a specific nameplate, so the exact configuration and compatibility are confirmed against the original unit tag and mounting drawings; our alternative is matched only after that review. Send your tag code or a drawing and we confirm the exact build before quoting.
Is L10-25-E-RF-360-S1-C-H a confirmed factory order code?+
This configuration is derived from the Parker/Helac HY34-1001 ordering key (L10-25 frame, L10 series, E English/SAE, RF mount, 360° rotation, S1 single/cantilever flange, C counterbalance valve, H standard seals & bearings) and the published L10 performance data. It is a configuration assembled per the catalog rules, not an independently verified factory order code read from a nameplate. The exact configuration and compatibility are confirmed against the original unit tag and mounting drawings before we quote.
What is the difference between the 180° and 360° L10-25 builds?+
They share the same L10 frame and output torque (~2,825 Nm at 207 bar) but are different effective builds: the 360° unit displaces about 1,828.8 cm³ and weighs 83 kg, while the 180° unit displaces about 914.4 cm³ and weighs 56.7 kg. They suit different travel, cycle-time and mounting-geometry requirements, so choose by the required rotation and confirm against the drawing rather than treating them as interchangeable.
Can I use the HKS M-DA-H 100 as a direct replacement?+
The listed alternatives are at a similar published torque level, but each is built to its own frame and mounting dimensions, so a similar rating does not guarantee a fit. Send us your unit tag and mounting drawing — we overlay the flange, shaft, ports and rotation and confirm whether one is a suitable option for your machine.
Which mounting styles are available for the L10-25?+
This page covers the E-RF-360-S1-C-H build. Send your tag code or a mounting drawing and we confirm the matching housing, flange and port arrangement against the available L10 mounting options.
Why is the exact HM model and price not shown?+
We confirm the HM model per inquiry after verifying the interface and operating parameters with you. This avoids shipping a part that looks right by model name but differs in mounting or rotation. Price is provided with that confirmed quote.
Request a replacement review
Need a replacement for L10-25?
Send your existing unit's nameplate and a mounting drawing. HM reviews the configuration and possible alternatives, confirms mounting and compatibility, and recommends the best available sourcing option for your machine.
- Original model / part number
- Machine brand & model
- Quantity & annual demand
- Mounting photo or drawing (if available)
Or email directly: hm@hmhydraulics.com