HMR2 series · spec 180 · Helical, foot-mount family
HMR2-180 helical rotary actuator
1,690 Nm driving torque at 210 bar, 180° rotation, in foot mount. The HMR2-180 is 3rd of 7 sizes in the HMR2 foot-mount range, built to order for steering and positioning duties on mobile equipment, where the housing bolts down onto a flat bracket face and the shaft carries the steering arm.
It sits between HMR2-095 at 960 Nm and HMR2-280 at 2,830 Nm.
Specifications — HMR2-180
| Rated driving torque | 1,690 Nm |
|---|---|
| Rated pressure | 210 bar |
| Rotation | 180° |
| Mounting | FT — Foot |
| Output shaft | 1F / 2F |
| Valve options | NV / CB / CS |
| Ordering pattern | HMR2-{spec}-180-FT-{output}-{valve} |
| Example order code | HMR2-095-180-FT-1F-NV |
HMR2 is rated at 210 bar continuous; peak pressure and flow at the actuator are checked against your circuit. 180° is the standard rotation on HMR2. A 360° build is quoted only after engineering confirmation.
What the code means
Every HMR2 unit is specified the same way. If your tag carries a different suffix, the base size is still HMR2-180.
| HMR2 | Series — helical rotary actuator, foot-mount family, 210 bar rated |
|---|---|
| 180 | Spec size — 1,690 Nm driving torque class |
| 180 | Rotation — total travel in degrees |
| FT | Mounting — foot |
| 1F / 2F | Output — 1F single flange shaft / 2F double flange shaft |
| NV / CB / CS | Valve — integral valve block or plain ports |
Where HMR2-180 sits in the HMR2 range
The nearest sizes either side of HMR2-180. If your load is borderline, these are the two builds worth checking before you commit to a size. See the full HMR2 range →
Cross reference
Models customers compare with HMR2-180
These are the models that sit in the same torque class and come up in the same enquiries. They are comparable references, not validated substitutions — we confirm the mounting pattern, shaft and port details against your unit before quoting.
| Make | Model | Reference page |
|---|---|---|
| Helac | L20-15 | See the L20-15 page |
| HKS | M-DA-H-F7 120 | See the M-DA-H-F7 120 page |
| Moveco | RP33 | See the RP33 page |
| Sungji | SRB-115 | No page — ask us |
Comparable performance based on rated torque class for engineering comparison. The mounting interface must be confirmed by our engineering team before quotation.
What we check before quoting
On the unit
- Mounting pattern and bolt spacing
- Shaft type, spline or keyway, and length
- Port size, thread form and valve arrangement
On the machine
- Available envelope and tie-rod clearance
- Working pressure and flow at the actuator
- Rotation stops and any mechanical limits
HMR2-180 questions
What can I use in place of an HMR2-180?
We build the HMR2-180 itself to order, and where an HMR2-180 is no longer available we quote the closest HM HMR2 build and confirm the fit against your unit. We do not publish a one-to-one substitution table, because mounting pattern, shaft, port thread and valve arrangement have to match your machine, not just the torque class.
Is HMR2-180 a direct replacement for Helac L20-15?
No — we do not claim a verified drop-in for any other make. Enquiries for this torque class arrive tagged as Helac L20-15, HKS M-DA-H-F7 120, Moveco RP33, Sungji SRB-115; we treat those as comparable references and compare rated torque, mounting interface, shaft and ports before quoting the HMR2-180 build that suits your machine.
How is the HMR2-180 order code put together?
The pattern is HMR2-{spec}-180-FT-{output}-{valve}. A worked example is HMR2-095-180-FT-1F-NV. Rotation, mount, output and valve are chosen per machine, so the code on your drawing is what we build to.
Still identifying the unit? Start with how to identify a rotary actuator or the cross-reference guide.
Send your tag and mounting drawing
We confirm the fit against HMR2-180, quote the matching build and give you a delivery date.
Request a quote for HMR2-180